Supply Polymer Soil Stabilizer PAS 500-01

Polymer Soil Stabilizer PAS 500-01

Polymer Soil Stabilizer pas 500-01 is very safe for human, animals and totally indifferent to the environment. PAS 500-01 is

in liquid form for use to stabilize and cure any kind of soil or soil mixture with additions sand and gravel. Use of products Polymer Soil

Stabilizer PAS 500-01 on many stages of construction of roads especially ecological and has many advantages.

The only contraindication to build using Polymer Soil Stabilizer PAS 500-01 is the period of frost and heavy rains.

Using Polymer Bitumen PAS 500-01 can build walkways, car parks, cycle lanes, municipal, county, provincial and landing.

We achieve cost reductions of 30% to 60%.

An interesting application with a very high dissolution of the polymer with water 1 - 30 and even 1 - 40 is to fight against dust and

spreading grass seed, where we get a slight stabilization of soil (embankments, slopes) and uniform dissemination of grass. We obtain a

kind of "hotbed" protection which helps in the growth of grass because it isolates the moisture and heat in the ground. Using a dye, etc.

The green allows us to observe the effectiveness and uniformity performed sowing.

Advantages: a number of important advantages in the exchange section polymer PAS 500-01.

Polymer Soil Stabilizer 500-01

⇒ Dries Flexible Biodegradable

⇒ Simple and Easy to Apply Dries Transparent of Clear Dries Completely Odorless

⇒ Cumulative Effect with Maintenance Dyes & Pigments can be Added for Color

⇒ Human, Animal, Marine Life and Vegetation Safe Water Resistant (will not break down with water)

⇒ Ultraviolet Ray Resistant (will not break down in sunlight)

⇒ Non−Flammable & Non−Volatile Non−Hazardous

⇒ Non−Corrosive & Safe for All Equipment Non−Slippery & Safe to Walk and Drive on Non−Regulated for Transportation (land Ocean Air)

Ecologically & Environmentally Safe

⇒ Non−Tracking & Non−Transferable (will not be picked up onto vehicles)

⇒ Non−Leaching (will not continue to seep into the soil)

⇒ Non−Dissipating (will not wash away with water once cured) Alkaline Soil Resistant (will not break down in alkaline soils)

⇒ Self Mixes with Water for Diluting (prior to applying to the soil)

⇒ PM 0 & PM 2.5 Compliant (stops hazardous dust particles of 2.5+ microns in size)

I n t e r n a t i o n a l S h i p p i n g C o n t a i n e r s

Type: Plastic Poly Tote

Steel cage pallet and bottom valve

Length: 39" / 0.991 m

Width: 48" / 1.22 m

Tare Weight: 35 lbs / 15.87 kg

Full Weigh: 2360 lbs /1070.49 kg

Other shipping containers are available upon special request

Any container capable of holding water is suitable for storing European Line Service

National Motor Freight Classification (NMFC) Item # f78f20 Class 70 (Stabilizers of Emulsifiers)

Harmonized Tariff System Code # 30904.30.20.00 (Vinyl Acetate Acrylic Copolymer)

Polymer Soil Stabilizer PAS 500-01

⇒ A family of products to stabilize the concrete, various kinds of traditional plaster, drywall, concrete floors, soil, dust control and erosion.

Polymers Soil Stabilizer SS are very safe for the environment, fully biodegradable preparations polymer SS in the form of

powder used to stabilize and cure any kind of soil or soil mixture with additions sand and gravel.

⇒ Another application is Hydro seeding of grass on flat surfaces or on the slopes. Very fast effectively and permanently can know the plant

the grass with protection against drying out the ground, washed away by rain water, protection from birds and the possibility of staining.

⇒ Polymer Soil Stabilizer prices and the cost of:

polymer SS is available - when ordering a minimum of 1 container 40' of about 16632 liters and prepayment is required 100% or

option 50/50% since the polymer is imported.

NOVELTY

Polymer Soil Stabilizer is available within 30 working days depending on the size of the delivery. The amount needed to stabilize

the m 1 m³ of the aggregate may contain from 0.5% to a maximum of 1% by weight of the polymer in a volume which is 10 kg to 19 kg

per 1 m³, which is 2 to 3 kg polymer per with 1 m² a thickness of 15 cm stabilization.

The cost of implementing soil stabilization depending on the category of the road and quality of aggregates native are lower by 20-40% The

polymer soil stabilizer PAS-500-01 is also used to control dust and erosion.

Technological advances and development of new nanotechnology allow for the production of new types of polymers. This progress led to the

revolutionary development of nanotechnology. When ground connections of the polymer molecules bind to molecules strongly combining the

ground. The main reason for the effectiveness of the bonds formed by Polymer Soil Stabilizer PAS-500-01 are deep and multiple cross

linking, giving the result of a very strong but flexible connections, which are formed during the drying or evaporation of water.

After drying Polymer Soil Stabilizer PAS 500-01 becomes transparent, giving a natural appearance unchanged for the hardened earth.

The quality of the results using PAS 500-01 depends on the application method and the amount of product used in the process. Lightweight

applications are used for dust control, and stopping the process of natural erosion. Heavier (more product) applications would result in the

result achieved in the construction of roads using cement.

Using the relevant product quantities Polymer Soil Stabilizer get the results that maintain their effect over the years.

Polymer Soil Stabilizer PAS 500-01 passed the tests in the Military Forces of the United States and are now used in many military

operations.

Manufacturer modernizing the methods currently used to stabilize the ground and in the production of roads, control dust and erosion.

The list of applications goes from building military airfields and roads for heavy mining equipment to protect the park paths, bicycle paths

forest and construction of a typical road infrastructure. The manufacturer makes every effort and resources to provide the

best technologically advanced and environmentally safe methods for soil stabilization.

What is the way a polymer made of Polymer Soil Stabilizer PAS 500-01 ?

Advantages

⇒ Minimal changes in the soil at the construction site, the minimum interference with soil and water conditions and hence.

⇒ Minimizing the risks of instability construction land after the construction of roads.

⇒ Minimizing the impact of adverse weather conditions on the construction process and operational.

⇒ Minimization of activities related to the exchange surface of earth masses.

⇒ Avoid complete replacement of the land.

⇒ It takes only minimal time to replace it (treatment through the delivery portion of a substrate with better properties

than stagnant) Avoid,therefore, export, dispatch, storage, disposal and all the problems connected with it (the destruction of heavy

equipment of existing roads, the cost of rolling stock, excessive fuel consumption).

⇒ Reduce considerably the involvement of equipment and costs involved.

⇒ Minimize the environmental degradation, social and existing road infrastructure.

⇒ Significantly reduce the use of costly construction materials like aggregates, shorten construction time.

⇒ Minimize the number of man-hours and operating hours of machines and equipment.

⇒ Minimize maintenance costs of the treatment repeatedly operation of roads, and repairs - changing only the wear layer of abrasion.

⇒ Significantly extend the service life of the road made by this method.

⇒ Polymer technology is safe for the environment and people at the stage of production of the polymer, also in the form of semi-finished

product for the construction of the road and after the execution (etc. asphalts are volatile and are subject to evaporation).

⇒ An additional advantage is the possibility of using other materials present in the soil (etc. Slags contaminated of road, rail, heaps from

cement production, mining, dust chimney, etc.), By incorporating them in a sealed plate soil - polymer PAS 500-01.

⇒ Very strong and flexible foundation roads made using polymer allows the use of thinner layers of abrasive, as well as construction, car

parks, bicycle paths, pedestrian walkways and roads with little traffic without wear layer - especially the asphalt - and on top of different

colors.

⇒ As a result of polymer technology PAS 500-01 allows you to reduce the total cost of the road construction on 30% -50% and the cost of

renovation of the existing road up to 65%.

MATERIAL SAFETY DATA SHEET

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: Polymer PAS 500-01

TRADE NAME: Polymer PAS 500-01

CHEMICAL NAME: N/A

2. COMPOSITION

Blend of severely hydro treated branched alkanes and alkylated organic compounds

Aromatic Carbon (Ca): 0%,

Paraffinic Carbon (Cp): 63-69%,

Alkylated organics (Cn): 31-37%

FORMULA: Non-hazardous, organic blended dust suppressant

3. HAZARD IDENTIFICATION

Non-Hazardous.

Prolonged exposure may cause skin irritation, drying, and/or cracking.

Prolonged exposure to mist may cause eye irritation, redness, swelling.

Ingestion hazard is nonexistent for small quantities.

Extreme overexposure or consumption of large quantities may cause diarrhea.

4. FIRST AID

Eyes: flush with water

Skin: flush with water,

Inhaled: breathe fresh air,

Ingested: drink water, call physician, do not induce vomiting.

5. FIRE SAFETY MEASURES

Flash point 351ºF (177ºC).

OSHA Flammability Class: Not applicable.

This material may burn but will not ignite easily.

Use dry chemical, carbon dioxide, foam or water spray for firefighting.

The products of degradation are less toxic than the product itself.

These products are carbon oxides and water.

6. ACCIDENTAL RELEASE

Contain spill, absorb with sand, clay, etc.

Keep sources of ignition away.

Dispose of in accordance with local disposal regulations for non-hazardous material.

Floor may be slippery.

Do not cut, grind, or weld empty containers that have contained this product unless and until thoroughly cleaned.

Clean-up crews should wear protective gear (gloves, long sleeves, goggles, masks, itp.).

7. HANDLING & STORAGE

Keep covered, sealed, store in cool dry location.

Use with adequate ventilation.

Do not use near fire or flame.

8. EXPOSURE CONTROL & PERSONAL PROTECTION

Respiratory protection: None required for most operations. If respiratory irritation is experienced, use an air-purifying respirator

Ventilation: Good general ventilation should be sufficient for most conditions

Eye protection: Chemical goggles or full face shields

Skin protection: Chemically impervious gloves.

Storage and handling facilities: should have a water source available for washing skin and eyes in the event of exposure.

9. PHYSICAL & CHEMICAL PROPERTIES

BOILING POINT: 510°F (266C°)

AUTOIGNITION TEMP: 670ºF (354ºC)

VAPOR PRESSURE: <1 mm Hg

SPECIFIC GRAVITY: 0.83-0.89

SOLUBILITY: Insoluble

VOLATILITY: Nil

APPEARANCE: Watery clear liquid

ODOR: None

pH: Not Applicable

10. STABILITY & REACTIVITY

Stable, non-reactive, non-corrosive, non-oxidizer, non-hazardous

Avoid contact with strong oxidizing agents

11. TOXICOLOGICAL INFORMATION & EFFECTS OF OVEREXPOSURE

Non-toxic, may be slight eye irritant, may cause slight skin irritation,extreme inhalation or ingestion may cause nausea or diarrhea.

Under normal use, testing on rats and rabbits has shown this product to be non-toxic and non-hazardous.

a. Oral Toxicity (rats): Practically non-toxic -LD50 greater than 2000 mg/kg

b. Dermal Toxicity (rabbits): Practically non-toxic -LD50 greater than 2000 mg/kg

c. Inhalation Toxicity (rats): Non applicable – harmful concentrations of mist or vapor are unlikely through any customary or reasonably foreseeable handling or use of this

product.

The components of this product:

a. Do not require OSHA Hazard cancer warning

b. Not listed on the National Toxicology Program Annual Report

c. Not classified by IARC as carcinogens

d. Not classified by ACGIH as suspected human or animal carcinogens

e. Contain no components on any of the following regulatory lists:

IARC, NTP Carcinogen, EPCRA CA Prop 65, MA RTK, NJ RTK, PA RTK

12. ECOLOGICAL INFORMATION

Product does not bio accumulate. Products of degradation are carbon oxides and water. The products of degradation are less toxic than the product itself.

⇒ ECOTOXICITY

⇒ This material is not harmful to aquatic organisms.

⇒ BIOCONCENTRATION INFORMATION

⇒ This material is not readily biodegradable.

13. DISPOSAL

Absorb spills with sand or clay. Dispose of waste as per local regulations for non-hazardous material.

14. TRANSPORT INFORMATION

⇒ D.O.T. HAZARD CLASSIFICATION: None, Non-regulated.

⇒ TDG CLASSIFICATION: None, Not regulated.

⇒ IATA CLASSIFICATION: None, Not Regulated.

⇒ IMOC: None, Not regulated.

15. REGULATIONS

HAZARDOUS SUBSTANCE PER 40CFR116:

⇒ None

D.O.T. PLACARDS:

⇒ None required

POISON CONSTITUENT PER 40 CFR 173:

⇒ None

UN/NA CODE:

⇒ Not applicable

REPORTABLE QUANTITY:

⇒ Not applicable

OSHA HAZARD CLASS:

⇒ Non OSHA hazardous per 29 CFR 1910

EPA SARA TITLE III:

⇒ None

ODS (40CFR82 Clean Air Act)

⇒ None

NON RESTRICTED FOR INTERNATIONAL ROAD, AIR, SEA TRANSPORT (NO IATA#)

16. OTHER INFORMATION

⇒ Hazard Rating Scale

⇒ 0 = insignificant, 1 = slight, 2 = moderate, 3 = high, 4 = extreme

⇒ HMIS HAZARD RATINGS:

⇒ Reactivity = 0, Flammability = 1, Health = 1

Management ELS